Gigabyte GA-EP35-DS3P Realtek Audio Driver 5.10.0.5973

CPU

1. Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor Extreme Edition/Intel Pentium D processor/ Intel Pentium 4 processor Extreme Edition/Intel Pentium 4 processor/ Intel Celeron processor in the LGA 775 package

2. L2 cache varies with CPU

3. 1600 (O.C.)/1333/1066/800 MHz FSB



Chipset   

1. North Bridge: Intel P35 Chipset

2. South Bridge: Intel ICH9R



Memory   

1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory

2. Dual channel memory architecture

3. Support for DDR2 1200 (O.C.)/1066/800/667 MHz memory modules



Audio   

1. Realtek ALC889A codec

2. High Definition Audio

3. 2/4/5.1/7.1-channel

4. Support for S/PDIF In/Out

5. Support for CD In



LAN   

1. Realtek 8111B chip (10/100/1000 Mbit)



Expansion Slots   

1. 2 x PCI Express x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x4.)

2. 3 x PCI Express x1 slots (share with the PCIE_16_2 slot)

3. 2 x PCI slots



Form Factor

1. ATX (305 x 244mm)



Storage Interface

South Bridge:

1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices

2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10



GIGABYTE SATA2 chip:

1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

2. 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices

3. Support for SATA RAID 0, RAID 1, and JBOD



iTE IT8718 chip:

1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive



IEEE 1394

1. T.I. TSB43AB23 chip

2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394 bracket connected to the internal IEEE 1394 header)



USB   

1. Integrated in the South Bridge

2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)



Internal I/O Connectors

1. 1 x 24-pin ATX main power connector

2. 1 x 8-pin ATX 12V power connector

3. 1 x 4-pin PCIe 12V power connector

4. 1 x floppy disk drive connector

5. 1 x IDE connector

6. 8 x SATA 3Gb/s connectors

7. 1 x CPU fan header

8. 2 x system fan headers

9. 1 x power fan header

10. 1 x North Bridge fan header

11. 1 x front panel header

12. 1 x front panel audio header

13. 1 x CD In connector

14. 1 x S/PDIF In header

15. 1 x S/PDIF Out header

16. 2 x USB 2.0/1.1 headers

17. 1 x IEEE 1394a header

18. 1 x parallel port header

19. 1 x serial port header

20. 1 x power LED header

21. 1 x chassis intrusion header



Back Panel Connectors

1. 1 x PS/2 keyboard port

2. 1 x PS/2 mouse port

3. 1 x coaxial S/PDIF Out connector

4. 1 x optical S/PDIF Out connector

5. 8 x USB 2.0/1.1 ports

6. 2 x IEEE 1394a ports

7. 1 x RJ-45 port

8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)



I/O Controller

1. iTE IT8718 chip



H/W Monitoring   

1. System voltage detection

2. CPU/System temperature detection

3. CPU/System/Power fan speed detection

4. CPU overheating warning

5. CPU/System/Power fan fail warning

6. CPU fan speed control



BIOS

1. Supports DualBIOS Plus

2. 2 x 8 Mbit flash ROM

3. Use of licensed AWARD BIOS

4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.



Unique Features   

1. Support for @BIOS

2. Support for Download Center

3. Support for Q-Flash

4. Support for EasyTune

5. Support for Xpress Install

6. Support for Xpress Recovery2





It is highly recommended to always use the most recent driver version available.



Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.



Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.